Safety Measures Of Using Pliers

Pliers Suppliers will share this article with you.

The following are the safety measures you should take when using pliers:

Check the wire cutting ability of the pliers and all other functions before taking a given application. When choosing the perfect pliers for your application, you must understand all types of pliers.

Use pliers to cut the wires at right angles.

Some people often use a hammer on pliers to cut thicker wires. This activity may damage your hands and pliers. Therefore, never use the hammer on the pliers, and do not use the pliers as a hammer.

In addition, never put the pliers in a place where the temperature is high. If the pliers are kept in an area where the temperature is too high, the performance of the tool will change. In this way, the pliers cannot be used for cutting wires or other applications.

If you want to extend the life of the pliers, take good care of them. You must clean it regularly, and you should also oil it regularly.

You cannot use pliers to tighten the nut.

Important uses of pliers:

When we need to cut wires, most of us think of pliers. However, in the electrical industry and other workshops, pliers are the basic requirements of operators.

Pliers are used to pulling wires and objects.

They are also used for splicing, bending, and tuning.

Most of the time, people mainly use pliers to remove insulation from wires.

Depending on the type of pliers, each plier has its own application.

What are the safety precautions for using pliers?

Wear safety glasses or goggles, or wear safety glasses or goggles when there is a possibility of being harmed by flying particles, wire fragments, etc.

Cut at right angles. Do not shake the tool from side to side or bend the wire back and forth on the cutting edge.

Using adjustable pliers allows you to firmly grasp the workpiece while maintaining a comfortable grip (ie, the grip is not too wide).

Use them only if the tools are intact.

The cut edges must be sharp. Blunt and worn cutting edges require more cutting force.

Make sure the toothed jaw is clean and sharp. Greasy or frayed jaws will lead to reduced safety. Such tools also require increased strength to hold the workpiece, which in turn increases the risk of muscle fatigue and repetitive strain.

Use oil tongs and wire cutters regularly. A drop of oil on the hinge will make these tools easier to use.

Pull up the pliers; do not push yourself away while applying pressure. If the tool accidentally slips and falls, you may lose your balance or touch the equipment or other hard objects with your hands, which may result in injury.

What should I avoid?

Do not cut hardened wires unless the pliers are specially made for this purpose.

Do not expose the pliers to excessive heat.

Do not use light pliers to bend hard wires. When using the tip of the needle-nose pliers to bend large wires, the needle-nose pliers may be damaged. Use stronger tools.

Don't use pliers as a hammer.

It is forbidden to knock wires and bolts with pliers.

Do not extend the length of the handle for greater leverage. Clamp with larger pliers.

Do not use pliers to clamp nuts and bolts; use a wrench.

Locking Pliers

评论